TASCAM US-1x2HR

129,00 €
14,00 € (10.85%)
115,00 €
Maksudega
Tootekood: US-1x2HR

High-Resolution USB Audio Interface (2 in / 1 mic, 2 out)

Kogus



Laos Raua tänava kaupluses

12 toodet
129,00 €
14,00 € (10.85%)

When one mic input is enough

The US-1x2HR is the smallest member of the Tascam US-HR series of high-resolution USB audio interfaces. It has one mic and one instrument input and is therefore particularly suitable for simple and intuitive guitar/vocal recording with a computer. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming. Last but not least, it is a perfect solution for feeding an amplifier system with music from a computer in high quality, for example for a birthday party.

Lower noise and distortion – better sound than ever

The compact US-1x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. The lightweight interface is ideal for mobile recording and production using an iPhone or iPad* with the included Cubasis LE so you can take it to your practice room, use it to report from a live event, or capture nature sounds outdoors.

Usability is key

All US-HR models offer a unique dye-cast aluminum honeycomb structure on the side panels with a slight upward tilt. This design not only results in a sleek, eye-catching design, it also provides just the right amount of weight so the interface won’t move when cables are connected or disconnected. Equally important, the upward tilt offers the ergonomic benefit of being angled in such a way as to make the interface easy to work with.

If you need an uncluttered, easy-to-use audio interface with two inputs and two outputs, very low noise, low distortion and superb sound quality, the Tascam US-1x2HR can be your reliable partner for many years.

Features at a glance

Advanced version of our popular US-1x2 with even better sound quality

Provides two audio inputs and two audio outputs to a Windows or Mac computer or iOS device

Audio resolution up to 192 kHz / 24 bit

USB Audio Compliance 2.0 for iOS connection

Hardware features

One XLR microphone input with switchable phantom power

One 6.3-mm TRS analogue input selectable between line level (balanced) and instrument level (unbalanced, for direct connection of a guitar or bass)

Two line inputs with RCA connectors on the rear can be used instead of the front inputs

One high-quality Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amp with ultra-low noise (EIN: –128 dBu)

Wide input gain range of 58 dB, ideal for dynamic microphones

Stereo line output

Direct monitor option for low-latency monitoring

Headphones output delivering 18 mW per channel

Independent level controls for line and phones outputs

USB bus-powered for mobile recording

Rugged aluminum body

Angled industrial design for ease-of-use on a desktop

Software features

In-house developed driver for Windows devices ensures stable operation with low latency

The buffer size for Windows can be selcted up from 4 samples to facilitate a recording environment with ultra-low latency

Each input can be switched on/off individually

Input monitor mode can be selected between stereo and mono

A loopback function allows two audio channels from the computer to be merged with the input signals and send this mix to the streaming or communication software

US-1x2HR
12 toodet