dbx ZonePro 1260m

€256.00 (19.68%)
Tax included
€256.00 (19.68%)
Reference: DBX1260MV-EU

12x6 Digital Zone Processor


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.

A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.

Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.

All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).

ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.

Recommended for: Installed.


12 Inputs / 6 Outputs

6 Balanced Mic/Line Inputs

4 Unbalanced, Mono-Summed RCA Input Pairs

S/PDIF Input

Microphone Gain per Channel

Pre-Configured Architecture

Two Configurable Input Insert Positions

One Configurable Output Insert Position

AutoWarmth® per Output Zone

Link Bus

Comprehensive Signal Metering

Front Panel LCD

9 User-Specified Front Panel Control

Optional ZC Controllers

Ethernet Control

Serial Control

Third Party Control

Wizard-Driven Configuration


   Application Guide-English [2.11 MB]

   Brochure-English [733 KB]

 CAD drawing rear [469 KB]

   Cut Sheet-English [1.39 MB]

   Install Guide-Spanish [487 KB]

   ZC Connectivity and Association [274 KB]

   HARMAN Reception Area AV Solution for Business [4.39 MB]

   HARMAN Open Offices AV Solution for Business [4.67 MB]

   HARMAN Lobby AV Solution for Business [3.86 MB]

   HARMAN Common Areas AV Solution for Business [4.74 MB]

   HARMAN Break Room AV Solution for Business [4.03 MB]

   Safety Sheet-English [328 KB]

   ZonePro Protocol Guide [246 KB]

   Install Guide-English [11 MB]

   ZonePRO Training (All) [367 MB]

   Quick Start Guide-English [860 KB]


Input 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input

Input Type Euroblock (Mic/Line), RCA (Source)

Input Impedance Euroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered

Max Input +20dBu Mic/Line, +12dBu RCA

CMRR > 40dB, typically >55db @ 1kHz

Mic Preamp gain 30 to 60dB

Mic Preamp Equivalent Input Noise (EIN) < -118dBu, 22Hz-22kHz, 150Ω Source Impedance

Mic Preamp Phantom Power 15V

Output 6 Total

Output Type Electronically Balanced, RF Filtered Euroblock

Output Impedance 120Ω Balanced, 60Ω Unbalanced

Max Output +20dBu

I/O Meter 6 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters

LCD Display LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute

A/D Converter dbx Type IV™ Conversion System

A/D Dynamic Range (line) >113dB, A-weighted, >110dB unweighted

Type IV Dynamic Range >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW

Sample Rate 48kHz

D/A Dynamic Range 112dB A-weighted, 109dB unweighted, 22kHz BW

Dynamic Range >110dB A-weighted, >107dB unweighted, 22kHz BW

THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response 20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk >80dB typical

Propagation Delay 0.8 msec

Operating Voltage 100-240 VAC, 50/60Hz

Power Consumption 27 W

BTU <92.13

Unit Weight 6.2 lbs / 2.81 kg

Shipping Weight 8.35 lbs / 3.78 kg

Dimensions 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)

Safety Agency Certifications UL 60065, IEC 60065, E 60065, EN 55013